Tamiya 42158 TRF (Tamiya Racing Factory) Transpeed BL 9.5T (12mm Rotor)

These brushless motors feature 12mm diameter rotors, which offer the ideal amount of torque performance required for racing.

Specs & Features
Motor x 1pc. (Wires and connectors are not included. Requires soldering by users.)
For expert drivers use only.
Do not use for Drift Racing.
Use with Item 42127 Tamiya Volac Brushless or Item 42144 Volac Brushless BL2.

Motor 9.5T, RPM 29520, kv 4100, Power 271, Efficiency 93

How to get Tamiya 42158 TRF (Tamiya Racing Factory) Transpeed BL 9.5T (12mm Rotor)? Click here!

Tamiya 42157 TRF (Tamiya Racing Factory) Transpeed BL 8.5T (12mm Rotor)

These brushless motors feature 12mm diameter rotors, which offer the ideal amount of torque performance required for racing.

Specs & Features
Motor x 1pc. (Wires and connectors are not included. Requires soldering by users.)
For expert drivers use only.
Do not use for Drift Racing.
Use with Item 42127 Tamiya Volac Brushless or Item 42144 Volac Brushless BL2.

Motor 8.5T, RPM 31680, kv 4400, Power 292, Efficiency 93

How to get Tamiya 42157 TRF (Tamiya Racing Factory) Transpeed BL 8.5T (12mm Rotor)? Click here!

Tamiya 42156 TRF (Tamiya Racing Factory) Transpeed BL 7.5T (12mm Rotor)

These brushless motors feature 12mm diameter rotors, which offer the ideal amount of torque performance required for racing.

Specs & Features
Motor x 1pc. (Wires and connectors are not included. Requires soldering by users.)
For expert drivers use only.
Do not use for Drift Racing.
Use with Item 42127 Tamiya Volac Brushless or Item 42144 Volac Brushless BL2.

Motor 7.5T, RPM 35280, kv 4900, Power 323, Efficiency 92

How to get Tamiya 42156 TRF (Tamiya Racing Factory) Transpeed BL 7.5T (12mm Rotor)? Click here!

Tamiya 42155 TRF (Tamiya Racing Factory) Transpeed BL 6.5T (12mm Rotor)

These brushless motors feature 12mm diameter rotors, which offer the ideal amount of torque performance required for racing.

Specs & Features
Motor x 1pc. (Wires and connectors are not included. Requires soldering by users.)
For expert drivers use only.
Do not use for Drift Racing.
Use with Item 42127 Tamiya Volac Brushless or Item 42144 Volac Brushless BL2.

Motor 6.5T, RPM 41040, kv 5700, Power 374, Efficiency 92

How to get Tamiya 42155 TRF (Tamiya Racing Factory) Transpeed BL 6.5T (12mm Rotor)? Click here!

Tamiya 42154 TRF (Tamiya Racing Factory) Transpeed B-less R Stock 21.5T

Make your rock crawlers brushless! Tamiya has designed a motor specifically for rock crawling vehicles. This high performance motor features high torque at low speed and linear response for throttle control. This item is recommended for use with the High Performance ESC Volac Crawler (Item 42153).

Specs & Features
New neodymium magnet produces strong torque.
Specially designed for rock crawler applications.
Motor x 1pc. (JST motor connectors are pre-wired.)
Can be used with CR-01 chassis machines and other low-speed R/C models.
KV rate: 1,600 (KV denotes rpm/volt.)

How to get Tamiya 42154 TRF (Tamiya Racing Factory) Transpeed B-less R Stock 21.5T? Click here!

Tamiya 42153 TRF (Tamiya Racing Factory) Volac Crawler ESC

Make your rock crawlers brushless! This is Tamiya's first brushless ESC designed for use with rock crawlers. You can use the ESC with both brushed and brushless motors depending on your motor preference. The ESC provides the throttle control needed for rock crawling. The brushless ESC features 10 adjustable 'Hill-Brake' settings, which allows braking when the throttle is in the neutral position. This item is recommended for use with High Performance Motor Transpeed Brushless (Super Stock 21.5T). (Item 42154)

Specs & Features
Can be used with brushed and brushless motors (auto adjustable)
Forward / Brake / Reverse are possible.
10 adjustable Hill-Brake settings are possible.
ESC x 1pc. (Tamiya battery connector and JST motor connectors are pre-wired.)
Hall sensor wire is included to connect to brushless motors.
Can be used with CR-01 chassis machines.

How to get Tamiya 42153 TRF (Tamiya Racing Factory) Volac Crawler ESC? Click here!

Tamiya 42144 TRF Volac Brushless ESC BL2

Tamiya has redesigned the Volac brushless speed controller, the Volac Brushless BL2. Marc Rheinard used this speed controller to win the 2008 IRMAR World Championship.

Specs & Features
10 Power Profiles are available, allowing you to adjust the ESC to your ideal settings for on-road or off-road, and low or high-traction tracks.
10 adjustable Automatic Brake settings allow you to set the level of braking action while the throttle is in neutral range.
Advanced design enables the ESC to run cooler in all racing conditions.
Features a Tamiya logo on the blue metal plated outer case.

Item Contents:
ESC x 1pc. (Wires and connectors are not included. Requires soldering by users.)
Detachable cooling fan x 1pc.
Cooling fan attachment screws x 4pcs.
Hall sensor wire x 1pc.
Nylon tie-wrap x 3pcs.
Double-sided tape x 1pc.
For expert drivers only.
Forward drive only (no reverse function)
For use with sensored brushless motors only.
Do not use for Drift Racing.
Use with Tamiya Transpeed Brushless motors (Item 42124-6, 42155-8).

How to get Tamiya 42144 TRF Volac Brushless ESC BL2? Click here!

Tamiya 49360 Special Edition Spare Parts TA05 Titanium Screw Set

Tamiya is offering this Titanium Screw Set for sale at the same time as the TA05 chassis so that users may install titanium screws when first building TA05. Compatible Chassis: TA05

How to get Tamiya 49360 Special Edition Spare Parts TA05 Titanium Screw Set? Click here!

Tamiya 49280 Bodies 1/10 MR-S Racing Body /Carbon

Tamiya 49280 Bodies 1/10 MR-S Racing Body /Carbon

How to get Tamiya 49280 Bodies 1/10 MR-S Racing Body /Carbon? Click here!

Tamiya 42166 TRF Aeration Blank Pistons *4

New TRF damper pistons are pre-dimpled so you can evenly drill your own holes.

Specs & Features
Each piston features 8 dimples allowing you to freely select the number and diameter of the holes.
Can be used with Item 54028 Buggy Aeration Oil Filled Damper Set.

How to get Tamiya 42166 TRF Aeration Blank Pistons *4? Click here!

Tamiya 42165 TRF Blank Pistons *4

New TRF damper pistons are pre-dimpled so you can evenly drill your own holes.

Specs & Features
Each piston features 6 dimples allowing you to freely select the number and diameter of the holes.
Can be used with TRF dampers such as:
53901 TRF Special Damper (F103GT)
53571 TRF Damper Set (Fluorine Coating)
42102 TRF Special Damper (Hard Black Coating) 4pcs
54000 M-Chassis Aluminum Damper Set (4pcs.)
84008 TRF Special Damper (Hard Coating) (Black)

How to get Tamiya 42165 TRF Blank Pistons *4? Click here!

Tamiya 42162 TRF TRF416X Chassis Kit

Tamiya 42162 TRF TRF416X Chassis Kit

How to get Tamiya 42162 TRF TRF416X Chassis Kit? Click here!

Tamiya 40135 Bodies TamTech-Gear Desert Gator Body

This spare body for the TamTech-Gear GB-01 Chassis reproduces the look of the popular Desert Gator, originally released as a 1/10 scale buggy. Set includes clear plastic body and wing as well as stickers, masking stickers and wing stay.
*Compatible with GB-01 chassis.

How to get Tamiya 40135 Bodies TamTech-Gear Desert Gator Body? Click here!

Tamiya 40130 Bodies TamTech-Gear The Frog Spare Body

Compatible Chassis or Parts: GB-01

How to get Tamiya 40130 Bodies TamTech-Gear The Frog Spare Body? Click here!

Tamiya 49040 Special Edition Spare Parts MINI Cooper Wheels Yellow x2

Compatible with M-03 and M-05 chassis machines.

How to get Tamiya 49040 Special Edition Spare Parts MINI Cooper Wheels Yellow x2? Click here!

Tamiya 40139 TamTech-Gear Option Parts GB-01 WildBoar Front Tires

Compatible Chassis or Parts: GB-01

How to get Tamiya 40139 TamTech-Gear Option Parts GB-01 WildBoar Front Tires? Click here!

Tamiya 49043 Special Edition Spare Parts MINI Cooper Wheels White x2

Compatible with M-03 and M-05 chassis machines

How to get Tamiya 49043 Special Edition Spare Parts MINI Cooper Wheels White x2? Click here!

Tamiya 42152 TRF Factory Tools Spare Bit for Hex Driver (2.0mm)

This new drill bit can be easily exchanged with the equipped bit on Item 42146 TRF Factory Tools Hex Driver (2.0mm) (Tentative).

How to get Tamiya 42152 TRF Factory Tools Spare Bit for Hex Driver (2.0mm)? Click here!

Tamiya 42149 TRF Factory Tools Hex Driver (7.0mm)

These new TRF tools are the essential goods required for TRF enthusiasts. Comes in the famous TRF blue, and on the side of the handle is a grub screw which will allow you to easily exchange parts when required.

How to get Tamiya 42149 TRF Factory Tools Hex Driver (7.0mm)? Click here!

Tamiya 42145 TRF Hex Wrench Screwdriver (1.5mm)

Tamiya 42146 TRF Hex Wrench Screwdriver (2mm)

Tamiya 40157 Bodies TamTech-Gear Buggy Champ Body

This spare body parts set features clear polycarbonate body, sticker sheet, and masking stickers. Create your own custom paint scheme with Tamiya Polycarbonate Spray Paints.
*Compatible Chassis or Parts: GB-02 (can also be used with GB-01 with modification)

How to get Tamiya 40157 Bodies TamTech-Gear Buggy Champ Body? Click here!

Tamiya 40132 Bodies TamTech-Gear The Fox-Mini Body

Clear body set of the TamTech-Gear Fox-Mini
* Compatible Chassis or Parts: GB-01

How to get Tamiya 40132 Bodies TamTech-Gear The Fox-Mini Body? Click here!

Tamiya 42101 TRF R/C Pit Bag L

Take your machines and race equipment to the track in style with this new R/C Pit Bag. Previously released pit bags featured 3 inner boxes that are each equivalent in size to the TRF415MSX package, but with the Pit Bag L you now have 3 inner boxes that are each equivalent in size to the larger TRF501X package. Each inner box is durable enough to hold heavy items such as batteries and chargers, and feature convenient carry handles. Navy blue bag features blue trimming highlights such as the grip belts and fasteners as well as both Tamiya and TRF logos.

How to get Tamiya 42101 TRF R/C Pit Bag L? Click here!

Tamiya 42150 TRF Factory Tools Hex BP Driver (2.5mm)

These new TRF tools are the essential goods required for TRF enthusiasts. Comes in the famous TRF blue, and on the side of the handle is a grub screw which will allow you to easily exchange parts when required.

How to get Tamiya 42150 TRF Factory Tools Hex BP Driver (2.5mm)? Click here!

Tamiya 42151 TRF Factory Tools Spare Bit for Hex Driver (1.5mm)

This new drill bit can be easily exchanged with the equipped bit on Item 42145 TR FFactory Tools Hex Driver (1.5mm) (Tentative).

How to get Tamiya 42151 TRF Factory Tools Spare Bit for Hex Driver (1.5mm)? Click here!

Tamiya 42148 TRF Factory Tools Hex Driver (5.5mm)

These new TRF tools are the essential goods required for TRF enthusiasts. Comes in the famous TRF blue, and on the side of the handle is a grub screw which will allow you to easily exchange parts when required.

How to get Tamiya 42148 TRF Factory Tools Hex Driver (5.5mm)? Click here!

Tamiya 42147 TRF Factory Tools Hex Driver (2.5mm)

These new TRF tools are the essential goods required for TRF enthusiasts. Comes in the famous TRF blue, and on the side of the handle is a grub screw which will allow you to easily exchange parts when required.

How to get Tamiya 42147 TRF Factory Tools Hex Driver (2.5mm)? Click here!

Tamiya 40504 TamTech-Gear Option Parts Aluminum Pinion Gear (16T)

Offering 4 different types of durable and high precision aluminum gears. Torque levels range from 12T for superior acceleration to 18T for maximum speed.

How to get Tamiya 40504 TamTech-Gear Option Parts Aluminum Pinion Gear (16T)? Click here!

Tamiya 40505 TamTech-Gear Option Parts Aluminum Pinion Gear (18T)

Offering 4 different types of durable and high precision aluminum gears. Torque levels range from 12T for superior acceleration to 18T for maximum speed.

How to get Tamiya 40505 TamTech-Gear Option Parts Aluminum Pinion Gear (18T)? Click here!

Tamiya 40147 TamTech-Gear Option Parts GT-01 Bumper Set

Compatible Chassis or Parts: GT-01

How to get Tamiya 40147 TamTech-Gear Option Parts GT-01 Bumper Set? Click here!

Tamiya 40553 TamTech-Gear Option Parts GB-01 Rear Wheels Plated

These new eye-catching Metal Plated Wheels offer an easy way for fans to dress up their TamTech-Gear off-road buggies, giving these compact R/C cars even more personality. They are essentially the same physical shape as ITEM 40109 and ITEM 40110 respectively, but with the brilliant Metal Plated effect.

*Compatible Chassis or Parts: GB-01

How to get Tamiya 40553 TamTech-Gear Option Parts GB-01 Rear Wheels Plated? Click here!

Tamiya 49489 Tamiya RC Limited Willcom Advan Vemac 408R (TA05-IFS)

About the WILLCOM ADVAN VEMAC 408R
This is a high performance R/C assembly kit of the WILLCOM ADVAN VEMAC 408R. The 408R took 1st place at Round 8 Autopolis Circuit and finally achieved a 3rd place in 2007 season ranking. The TA05-IFS chassis features front inboard suspension and 4WD system with equal length of drive belts. Front suspension with horizontally-mounted oil dampers absorbs shocks from running surface via push rod and rocker arm and provides precise suspension adjustment.

About the Model
Length:442mm.
Realistic polycarbonate body.
Includes stickers to depict sky blue areas and sponsor logos.
Features lightweight front & rear reversible suspension.

How to get Tamiya 49489 Tamiya RC Limited Willcom Advan Vemac 408R (TA05-IFS)? Click here!

Tamiya 48208 1/35 RC Tank with Controller Set 135 RC Russian T-34-85 w/4ch CONTROL UNIT

The German Panzer's greatest rival, the Russian T-34 is now available as a 1/35 scale R/ C tank. The tank's distinctive shape cast turret and sloped armor has been faithfully reproduced. Why not line it up against its German rivals such as the 1/35 German Panther Type G Late Version (Item 48206) for an impressive WWII scene.

About the Model
4-channel transmitter included.
Newly designed chassis.
Moves forward/reverse, sharp turning, pivot turning, gun turret rotates, gun barrel can be elevated and depressed.
Pre-assembled belt type tracks.
Compact gearboxes and motors drive the tank.
One compact unit controls both turret rotation and gun elevation.
The gearboxes and the all-in-one turret rotation and gun elevation unit are pre-assembled.
Two standard buttons are also equipped for extra channel use.
Uses four AAA alkaline batteries and one (9V) alkaline battery (all sold separately) for transmitter.

How to get Tamiya 48208 1/35 RC Tank with Controller Set 135 RC Russian T-34-85 w/4ch CONTROL UNIT? Click here!

Tamiya 42143 TRF 4mm Alu. Serrated Nut *4 Blue

With these new serrated wheel nuts, all R/C drivers will go to the track with peace of mind knowing that you would be able to push your machine harder and faster. They provide excellent wheel-gripping for secure wheel attachment.

4mm Aluminum Serrated Wheel Nut (Blue) X 4pcs.
For general use.

How to get Tamiya 42143 TRF 4mm Alu. Serrated Nut *4 Blue? Click here!

Tamiya 42139 TRF 511 Chassis Kit - Off Road Racer

This Off Road Racer TRF511 chassis kit picks up where the successful high-end 1/10 R/C Buggy TRF501X left off. From participating in road competitions, many valuable lessons have been learned and have been applied to making this TRF511 more user friendly and a lot more competitive.

About the Model
Although it follows the same general layout as the TRF501X, almost every part has been newly designed, making it lighter also improving ease of maintenance.
Thanks to the data taken from actual races, the suspension arms have been redesigned for improved performance.
The new drivebelts are stronger, more durable, and substantially reduces drive resistance.
Equipped is an upper/lower separate type center bulkhead which improves motor removal and installation efficiency as well as spur gear and pinion gear clearance setting adjustments.
New battery position improves the machine's weight balance as well as jumping and landing characteristics.
The suspension's new geometry guarantees greater stability and better turning performance.
Battery pack & charger, ESC, body, chassis cover, rear wing, tires, and 2-channel R/C system separately required.
A wide range of Grade-Up parts are available for further customizing your machine.
Note: This is a chassis only kit. A body and rear wing are not included. Items 54133 TRF511 Body/Chassis Fairing and 54134 Buggy Racing Wing lowered version Set are sold seperately.

How to get Tamiya 42139 TRF 511 Chassis Kit - Off Road Racer? Click here!

Tamiya 49484 Bodies Mazda RX-7 Lightweght Body

These new spare body parts sets are an easy way to reduce those few grams of weight that can make a crucial difference during R/C races.

How to get Tamiya 49484 Bodies Mazda RX-7 Lightweght Body? Click here!

Tamiya 49485 Bodies EBBRO 350R Lightweight Body

These new spare body parts sets are an easy way to reduce those few grams of weight that can make a crucial difference during R/C races.

How to get Tamiya 49485 Bodies EBBRO 350R Lightweight Body? Click here!

Tamiya 45038 Engine Parts & Accessories Brushless ESC TBLE-01

Tamiya 45038 Engine Parts & Accessories Brushless ESC TBLE-01

How to get Tamiya 45038 Engine Parts & Accessories Brushless ESC TBLE-01? Click here!

Tamiya 45039 Engine Parts & Accessories TBLM-01 w/TBLE-01

Tamiya 45039 Engine Parts & Accessories TBLM-01 w/TBLE-01

How to get Tamiya 45039 Engine Parts & Accessories TBLM-01 w/TBLE-01? Click here!

Tamiya 42141 Engine Parts & Accessories VG Tire Warmer

Size: 163x118x57mm

How to get Tamiya 42141 Engine Parts & Accessories VG Tire Warmer? Click here!

Tamiya 42140 Engine Parts & Accessories VG Motor Checker

Size: 124x114x47mm

How to get Tamiya 42140 Engine Parts & Accessories VG Motor Checker? Click here!

Tamiya 42125 TRF Transpeed Brushless 6.5T Motor

TRF Transpeed Brushless Series items (Item 42124-42126 Transpeed Brushless Motors (3.5T, 6.5T, & 7.5T) and Item 42127 Volac Brushless Speed Controller) are designed for use with grip-racing cars such as TRF416 and TRF511. In contrast, Drift Racing requires long periods on full throttle which puts the motor and ESC under an extremely heavy load, resulting in possible damage to the brushless components. Therefore, please do not use the four items mentioned above for Drift Racing.

How to get Tamiya 42125 TRF Transpeed Brushless 6.5T Motor? Click here!

Tamiya 42126 TRF Transpeed Brushless 7.5T Motor

Tamiya 42124 TRF Transpeed Brushless 3.5T Motor

Tamiya 42134 TRF M-Chass.Alu.Damper HL Cylinder

M-Chassis Aluminum Damper Set

How to get Tamiya 42134 TRF M-Chass.Alu.Damper HL Cylinder? Click here!

Tamiya 42135 TRF VG Ni-MH/Ni-Cd Fast Charger

This High Performance Battery Charger has been designed for Tamiya Ni-Cd and Ni-MH batteries and can be also used with Li-Po batteries. Prior to use, read carefully, fully understand, and follow the instructions supplied with this unit. Charge battery according to the instruction manual.

About the Model
The following data is for the Muchmore model charger. We will basically use this charger for Tamiya Charger.
Dimensions : 14x114x47mm
Weight: 520g
Number of cells (Ni-MH/Ni-Cd): 1~14cells(12~16.8V)
Number of cells (Li-Po): 1~6cells(3.7/7.4/11.1/148/18.5V/22.2V)
Max. charge current: 0.1~10A
Max. discharge current: 0.1~10A
Discharge cutoff voltage: automatically selected
Input voltage: 9~15V
Charging mode: Ni-MH, Ni-Cd, Li-Po
Discharge mode: Ni-MH, Ni-Cd, Li-Po
Trickle charge rate (after charge): 0.1A(Ni-Cd mode)
Voltage threshold/Delta peak: 3mV/cell(Ni-MH), 6mV/cell(Ni-Cd)
Max. charge watts: 120watts
Max. discharge watts: 40watts
Temperature probe: Magnetic sensor (35~65deg.C)
Keys: 4
Cooling: IC controlled single fan

How to get Tamiya 42135 TRF VG Ni-MH/Ni-Cd Fast Charger? Click here!

Tamiya 42136 TRF VG 24A Stable Power Supply

About the Model
Case:135x145x50mm
Weight: 758g
Constant Current: 24A
Peak Current: 30A/0.sec.
Input 100~250V (auto selected )
Output voltage: 12.0~16.0V

How to get Tamiya 42136 TRF VG 24A Stable Power Supply? Click here!

Tamiya 42137 TRF Competition O-Rings for Oil Damper

These competition O-Rings (P3 size) are made from a unique silicon giving you the extra support you need when racing. They have excellent durability qualities, apply minimal friction to the dampers which helps prevent oil loss, and can also be used in extreme temperatures (-80 degrees Celsius) with little to none shape deterioration.

One pack contains 8 O-Rings.
Can be used to replace P3 O-Rings installed in oil dampers such as CVA and TRF dampers.

How to get Tamiya 42137 TRF Competition O-Rings for Oil Damper? Click here!

Tamiya 45028 Engine Parts & Accessories Eletronic Speed Coller TEU-302BK

Tamiya 45028 Engine Parts & Accessories Eletronic Speed Coller TEU-302BK

How to get Tamiya 45028 Engine Parts & Accessories Eletronic Speed Coller TEU-302BK? Click here!

Tamiya 45037 Engine Parts & Accessories ESC TEU-103BK for Twin Motor

Tamiya 45037 Engine Parts & Accessories ESC TEU-103BK for Twin Motor

How to get Tamiya 45037 Engine Parts & Accessories ESC TEU-103BK for Twin Motor? Click here!

Tamiya 49382 Special Edition Spare Parts On-Road Hard Spring White

Special promotional item offered to attendants of Tamiya Fair, and to our overseas agents. White colored versions of our popular ITEM 53440 On-Road Tuned Hard Spring Set.
*Compatible with following items: 50519 CVA Mini Shock Unit II, 50746 CVA Super Mini Shock Unit Set, 53155 Low Friction Aluminum Damper, 51280 TA03 Super Low Friction Damper, 53391 Formula Super Friction Damper and TRF Special Damper.

How to get Tamiya 49382 Special Edition Spare Parts On-Road Hard Spring White? Click here!

Tamiya 49438 Bodies Nismo R34 GT-R Z-Tune Lightweight Body

These new spare body parts sets offer that extra bit of weight savings that may be crucial for winning a race. The thickness of the polycarbonate shell has been reduced, with extra care taken to reduce weight from the upper sections of the shell to provide a lower center of gravity. Create your own unique paint scheme by using Tamiya Polycarbonate Spray (PS) Paints. Sets also include separately molded parts for rear wing and side mirrors, as well as sticker sheets.

Compatible Chassis or Parts:
TA05, TA04, TT-01, TGS, TNS, TB-02, TB-01, TL-01, TB Evolution IV, TRF415, TG-10-Mk.1 (Excluding short wheelbase and wide tread chassis)

How to get Tamiya 49438 Bodies Nismo R34 GT-R Z-Tune Lightweight Body ? Click here!

Tamiya 49490 Tamiya RC Limited Mitsubishi Pajero Metaltop Wide

Tamiya brings back another timeless classic with the re-release of the Mitsubishi Pajero Metaltop Wide R/C model.

About the Mitsubishi Pajero
First introduced in 1982, Mitsubishi's Pajero line of Sport Utility Vehicles has enjoyed much commercial and racing success. It was available in both short wheelbase 3-door and long wheelbase 5-door versions. Special race versions of the Pajero have been taking part in rally races around the world since 1983, and it is the single most successful vehicle in the history of the Paris Dakar Rally, a fact which confirms the Pajero's superb off-road capabilities.

About the Model
Limited edition re-release of the 1/10 R/C Mitsubishi Pajero Metaltop Wide assembly kit.
4WD XC chassis features realistic suspension system.
Front and rear gear differentials ensure dependable power transmission.
Suspension equipped with oil dampers to effectively absorb shocks from off-road driving.
Modern TEU-101BK ESC replaces the old 3-step ESC, and Type 540 motor is also included.
Exquisitely-detailed body shell is made from durable ABS resin and Tamiya TS Spray Paints can be used to create custom paint schemes.
Headlight mounts enable installation of high brightness LEDs. LEDs can also be installed for the auxiliary fog lights on the front bumper.
A perfect item for enthusiasts seeking true-to-life scale realism in their R/C cars.

How to get Tamiya 49490 Tamiya RC Limited Mitsubishi Pajero Metaltop Wide? Click here!

Tamiya 42128 TRF VG Joint & Cup Grease

This new Joint & Cup grease is best suited to fast moving parts. It assists in preventing wear and tear on parts. Other types of grease which have been used in the past tend to dry up and cause stiffening. With the new grease, there are no drying up and stiffening effects making this the grease to have for fast moving parts. The grease is a blue color and the case weighs 3g.

How to get Tamiya 42128 TRF VG Joint & Cup Grease? Click here!

Tamiya 42129 TRF VG Damper Grease

This is the first type of grease in its range for damper use. It ensures a smooth sliding action for the dampers and prevents oil leaks from the O-rings. The grease color is blue and the case weighs 3g.

How to get Tamiya 42129 TRF VG Damper Grease? Click here!

Tamiya 42130 TRF VG Thrust Bearing Grease

Compared to other greases that may be used for lubricating thrust bearings, the new VG Thrust Bearing Grease has superior heat resistant qualities that helps in extending the life of the ball diff thrust bearings. The grease color is gray and the case weighs 3g.

How to get Tamiya 42130 TRF VG Thrust Bearing Grease? Click here!

Tamiya 42131 TRF Sp Damper HL Cylinder *2

Tamiya 42131 TRF Sp Damper HL Cylinder *2

How to get Tamiya 42131 TRF Sp Damper HL Cylinder *2? Click here!

Tamiya 42132 TRF Aeration Damper HL Cylinder F

Buggy Aeration Oil Damper Set for the TRF 501x and TRF501x World Edition.

How to get Tamiya 42132 TRF Aeration Damper HL Cylinder F? Click here!

Tamiya 42133 TRF Aeration Damper HL Cylinder R

Buggy Aeration Oil Damper Set for the TRF 501x and TRF 501x World Edition.

How to get Tamiya 42133 TRF Aeration Damper HL Cylinder R? Click here!

Tamiya 42113 TRF 1050 Bearing (Fl.Sealed)*2

Tamiya 42113 TRF 1050 Bearing (Fl.Sealed)*2

How to get Tamiya 42113 TRF 1050 Bearing (Fl.Sealed)*2? Click here!

Tamiya 40164 Bodies TamTech-Gear Porsche Turbo RSR Type 935 Body

Tamiya 40164 TamTech-Gear Option Parts Porsche Turbo RSR Type 935 Body Parts Set

How to get Tamiya 40164 Bodies TamTech-Gear Porsche Turbo RSR Type 935 Body? Click here!

Tamiya 40129 TamTech-Gear Option Parts Battery Connector Set

Compatible Chassis or Parts: GB-01

How to get Tamiya 40129 TamTech-Gear Option Parts Battery Connector Set? Click here!

Tamiya 49421 Special Edition Spare Parts Flu. Yellow MN Dish Wheel/0

Add a colorful, eye-catching feature to easily distinguish your R/C machine at the track as well as increase your car?s settings options to adapt to various track conditions. These special wheel sets are limited edition color variations of previously released Option Part wheels.

Each set contains 4 wheels.
*Compatible Chassis: Most on-road touring car chassis (TT-01, TA05, TB-02, TB-Evo.V, TRF415, etc.)

How to get Tamiya 49421 Special Edition Spare Parts Flu. Yellow MN Dish Wheel/0? Click here!

Tamiya 49422 Special Edition Spare Parts Flu. Pink MN Dish Wheel/+2

Add a colorful, eye-catching feature to easily distinguish your R/C machine at the track as well as increase your car?s settings options to adapt to various track conditions. These special wheel sets are limited edition color variations of previously released Option Part wheels.

Each set contains 4 wheels.
*Compatible Chassis: Most on-road touring car chassis (TT-01, TA05, TB-02, TB-Evo.V, TRF415, etc.)

How to get Tamiya 49422 Special Edition Spare Parts Flu. Pink MN Dish Wheel/+2? Click here!

Tamiya 49469 Special Edition Spare Parts M-Chassis 11-S Wheel Flu.Yel*4

These limited production wheels are a color variation of ITEM 51237 Suzuki Swift Super 1600 Wheels (4pcs.) and will give R/C fans another option to personalize their M-chassis machines.

*Compatible Chassis: All M-03 and M-04 chassis

How to get Tamiya 49469 Special Edition Spare Parts M-Chassis 11-S Wheel Flu.Yel*4? Click here!

Tamiya 48207 1/35 RC Tank with Controller Set US Medium Tank M4A3 Sherman w/4ch

The M4 Sherman Tank was the most used tank during WWII by the American Army. TheM4A3 came armed with a 75mm gun and approximately 3071 tanks were produced. They saw fierce action at Normandy, and also served throughout the Pacific through to the end of the war. About the Model
- 4 channel transmitter included.
- Moves forward/reverse, sharp turning, pivot turning, gun turret rotates, gun barrel can be elevated and depressed.
- Pre-assembled belt type tracks.
- Compact gearboxes and motors drive the tank.
- One compact unit controls both turret rotation and gun elevation.
- The gearboxes and the all-in-one turret rotation and gun elevation unit are pre-assembled.
- Two standard buttons are also equipped for extra channel use.
- Uses four R03/AAA/UM4 alkaline batteries and one 006(9V)/6F22 alkaline battery for transmitter.
- Equipped die-cast tension shaft allows you to adjust the tension of the tracks.

How to get Tamiya 48207 1/35 RC Tank with Controller Set US Medium Tank M4A3 Sherman w/4ch? Click here!

Tamiya 42105 TRF 501X World Championship Version (Special Offer)

The IFMAR Electric 1/10 Off-Road Car World Championships are held in Japan this year and Team TRF will be there in force with their specially-tuned TRF501X machines. To commemorate this participation, Tamiya is announcing the release of a TRF501X World Championship Edition, featuring many special parts that will be used at this world-class R/C race. These option parts promise to bring out the true potential of this racing buggy.

About the Model
- 1/10 scale assembly kit R/C model of the TRF501X, with many special option parts added.
- Differential has been redesigned to increase performance and durability.
- New parts including aluminum caster block, aluminum rear upright, and reinforced upper arm mounts further enhance the buggy's ability to withstand the rigors of off-road racing.
- New ball connectors made from high-strength steel.
- New damper pistons made from Delrin, a lightweight and low-friction resin material.
- The entire drivetrain has been modified to improve power-transfer efficiency, with parts such as an 18T center pulley, 37T ball diff. pulley, and 369mm drive belts.
- Clear polycarbonate body shell has been redesigned for better aerodynamics.

How to get Tamiya 42105 TRF 501X World Championship Version (Special Offer)? Click here!

Tamiya 42107 TRF 1/10 TB Evolution 5 MS Chassis

The ultimate shaft-driven 4WD chassis in the TB Evolution Series, the TB Evolution 5, has been further tuned and refined to become this limited edition TB Evolution 5 MS.
About the Model
- Race-spec 1/10 R/C TB Evolution 5 MS chassis kit.
- Features TRF416-style steering and suspension systems.
- New motor layout sees motor mounted further forward to improve handling characteristics and make spur gear changes much easier.
- Durable aluminum diff. joint is capable of harnessing the power from even high-output motors.
- Protective covers over the swing shaft connection ensures smooth and unobstructed operation.
- Front part of lower deck is made from durable nylon material and is mounted with a small-size bumper that reduces interference with road in case of a roll.
- Reversible-type suspension features short-span suspension arms, enabling minute settings adjustments.
- 2-channel R/C system with ESC, motor, body, tires, battery pack and charger all separately required.

How to get Tamiya 42107 TRF 1/10 TB Evolution 5 MS Chassis? Click here!

Tamiya 42104 TRF 415MSXX Reedy Race Edition (Special Offer)

The new TRF Series continues to expand with its second chassis kit, the TRF415 MSXX Marc Rheinard Edition 2007. This chassis kit has the same specs and special parts as the one used by TRF driver Marc Rheinard to take his second consecutive victory at the Reedy Touring Car race in May of this year, making it perfect for those who want to stay on the cutting edge of R/C racing development.

About the Model
- Race-spec direct drive system equipped with rear ball differential for quick acceleration.
- Double deck carbon fiber chassis features brand new 2mm upper deck, which is designed to help convert chassis roll into cornering speed, and 2.5mm lower deck.
- R/C system, tires, body, motor, ESC, running battery & charger separately required.

How to get Tamiya 42104 TRF 415MSXX Reedy Race Edition (Special Offer)? Click here!

Tamiya 49496 Tamiya RC Limited DF-03 MS Chassis RC 4WD Off Road Racer DF-03MS

The mid-range 4WD off-road platform DF-03 now gets the full race-spec treatment to bring out its hidden potential. This limited edition buggy features a chassis that is loaded with performance enhancing parts and a Dark Impact body shell with special markings designed by TRF driver Satoshi Maezumi.

About the Model
- DF-03 chassis kit is loaded with the following parts to boost performance:
53791 DF-02 Assembly Universal Shaft
53924 DF-03 Heat Sink Bar Set
53925 DF-03 Slipper Clutch Set
53926 DF-03 Aluminum Damper Set
53931 DF-03 Center One-Way Set
53940 DF-03 Hard Turnbuckle Shaft Set
53941 DF-03 Aluminum Turnbuckle Steering Rod
53948 DF-03 Aluminum One-Piece Propeller Cup Joint
53949 DF-03 Lightweight Battery Stopper Pin
53984 Buggy Racing Wing
51000 Hi-Torque Servo Saver (Black)

Front and rear white-colored large dish wheels and white damper springs match the special TRF Satoshi Maezumi color scheme.
2-channel R/C system with ESC, motor, tires, 7.2V battery and charger are separately required.

How to get Tamiya 49496 Tamiya RC Limited DF-03 MS Chassis RC 4WD Off Road Racer DF-03MS? Click here!

Tamiya 49486 Tamiya RC Limitied Nismo Silvia(TB-02) RC Nismo Coppermix Silvia TB02 Drigt Spec Chassis

Recent R/C item requests from fans have revealed a high demand for a TB-02 chassis modified for drifting. To meet this demand, Tamiya announces the popular NISMO Coppermix Silvia body mounted on a drift spec TB-02 chassis.

About the Model
- Shaft-driven 4WD TB-02 chassis features durable bathtub frame and longitudinally-mounted motor.
- Front and rear suspension equipped with C.V.A. Mini Shock dampers. 5mm ball connectors and turnbuckle shafts enable easy axle adjustment.
- Gearboxes are fully enclosed to protect from dirt and debris.
- Stylish black 5-spoke wheels.
- Included Super Driftech Tires (24mm Width) are made from resin material for long-lasting and effortless drift action.
- Clear body parts made from lightweight polycarbonate material and accurately replicates the NISMO Coppermix Silvia. Sticker set is also included to depict the cars colorful livery.
- Comes with brilliant LEDs for head and tail lights that turn on automatically when car is switched on.
- Add the TLU-02 Light Control Unit (ITEM 53937) for greater control of light operations.
- Type 540 motor included.
- 2-channel R/C system with ESC, servos, 7.2V battery & charger are separately required.
- Wide variety of Option Parts available to customize your machine.

How to get Tamiya 49486 Tamiya RC Limitied Nismo Silvia(TB-02) RC Nismo Coppermix Silvia TB02 Drigt Spec Chassis? Click here!

Tamiya 41031 Engine Parts & Accessories Glow Engine FS-15RS

RC GP Glow Engine FS-15R

How to get Tamiya 41031 Engine Parts & Accessories Glow Engine FS-15RS? Click here!

Tamiya 41086 Engine Parts & Accessories FR-32FX Glow Engine with Aluminum Heat Sink Head

Previously announced as a sneak-preview item at the Shizuoka Hobby Show, the FR-32FX Aluminum Heat Sink Head has now received an official release date. This precision Glow Engine Part is made from blue aluminum, which is not only eye-catching, but also saves weight and enhances heat dissipation. Available as an individual item for those who only want to replace their stock heat sink head, it is also being offered together with the FR32-FX glow engine as a convenient spare part package.

How to get Tamiya 41086 Engine Parts & Accessories FR-32FX Glow Engine with Aluminum Heat Sink Head? Click here!

Tamiya 42123 TRF Volac MS C3 ESC

The Volac ESC Volac MS was released in 2004 was well-liked by the R/C racing crowd thanks to its high-performance and user-friendliness. A new model of this ESC is now being released with quite a few improvements.

About the Model
-Features the same physical size as the Volac MS, but is 18.8g lighter for greater weight savings.
-Comes in a stunning metallic blue color with a special plate designed by TRF driver Satoshi Maezumi.
-Compatible with frequencies from 900Hz to 12kHz (KO Propo setting adapter may be needed).
-ESC is programmed with input from TRF driver Satoshi Maezumi for a special default setting.

How to get Tamiya 42123 TRF Volac MS C3 ESC? Click here!

Tamiya 41049 Engine Parts & Accessories Glow Engine FS-12R

RC GP Glow Engine FS-12R

How to get Tamiya 41049 Engine Parts & Accessories Glow Engine FS-12R? Click here!

Tamiya 49385 Special Edition Spare Parts TRF415MSX Lower Deck/Stick

Turn your TRF415MSX into an Ultimate High-end Touring Car!
This conversion kit allows you to mount a standard 7.2V racing pack battery onto the TRF415MSX chassis, turning your machine into a pure racing-ready high-end touring car. Parts have been designed with an eye towards easy maintenance, and optimum balance.

About the Model
All new lower deck (2.5mm carbon), carbon upper deck, rear bulkhead and aluminum center post
Includes battery plate designed for use with 7.2V racing pack battery

How to get Tamiya 49385 Special Edition Spare Parts TRF415MSX Lower Deck/Stick? Click here!

Tamiya 49335 Special Edition Spare Parts 1/10 TB EVO.3 Blue Conversion

TB Evolution III Blue Conversion Set features 19 pieces of blue aluminum TRF parts to customize your TB-EVO III or TB-02. Motor mount features fins that act as a heatsink to further improve performance.

Set Includes:
-Steering wheel arm
-Suspension mounts
-Propeller shaft
-One-way holder
-Aluminum spur holder
-Swing shaft
-Steering post
-Blue aluminum servo stay

How to get Tamiya 49335 Special Edition Spare Parts 1/10 TB EVO.3 Blue Conversion? Click here!

Tamiya 49495 Special Edition Spare Parts TRF416 Lower Deck (2.5mm)

This low carbon graphite deck now comes 2.5mm thick compared to previous 2.25mm decks. The deck's rigidity has improved, making it excellent for high speed racing and high gripping tracks. Comes equipped with the motor cooling hole and an air duct.

How to get Tamiya 49495 Special Edition Spare Parts TRF416 Lower Deck (2.5mm)? Click here!

Tamiya 41079 Engine Parts & Accessories Handy Starter (Starter Only)

The Handy Starter will make starting your glow engine R/C car a breeze. Designed for use with a variety of driven gear units (ITEM# 41076 Driven Gear Unit A, ITEM# 41077 Driven Gear Unit B, and ITEM# 41080 Driven Gear Unit C, all available separately) for different glow engine sizes. Engine can be easily started by inserting drive shaft into the driven gear unit and pushing starter button. FET switch and safety circuit protects unit from overload and provides reliable operation. Make sure holes are made in the body shell for glow plug heater and starter to enable starting the engine without detaching the body. Requires 7.2V battery and Glow Plug Heater (both available separately) for operation.

How to get Tamiya 41079 Engine Parts & Accessories Handy Starter (Starter Only)? Click here!

Tamiya 49342 Special Edition Spare Parts TRF415 Motor Mount Bulkhead (Heat Sink Type)

TRF415 Motor Mount Bulkhead (Heat Sink Type)
Motor mount combined with rear bulkhead works as a heat sink preventing performance reduction due to heat.

This part will fit product 58320 only!

How to get Tamiya 49342 Special Edition Spare Parts TRF415 Motor Mount Bulkhead (Heat Sink Type)? Click here!

Tamiya 49499 Special Edition Spare Parts TB-03 Titanium Screw Set

These are parts for classic indispensable lightweight competition vehicles. The following parts are included in the set:

-3x6mm Titanium screws (1 pc.)
-3x5mm Titanium screws (4 pcs.)
-3x8mm Titanium screws (7 pcs.)
-3x6mm Titanium screws (6 pcs.)
-3x10mm Titanium screws (16 pcs.)
-3x8mm Titanium screws (27 pcs.)
-3x12mm Titanium screws (2 pcs.)
-3x10mm Titanium screws (11 pcs.)
-3x12mm Titanium screws (8 pcs.)
-3x16mm Titanium screws (1 pc.)
-3x23mm Titanium screws (2 pcs.)

How to get Tamiya 49499 Special Edition Spare Parts TB-03 Titanium Screw Set? Click here!

Tamiya 41037 Engine Parts & Accessories FS-12LTOversize Heat Sink Head

RC GP FS-12LTOversize Heat Sink Head

How to get Tamiya 41037 Engine Parts & Accessories FS-12LTOversize Heat Sink Head? Click here!

Tamiya 41020 Engine Parts & Accessories Over-Size Heat Sink Head

RC GP VR-S Oversize Heat Sink

How to get Tamiya 41020 Engine Parts & Accessories Over-Size Heat Sink Head? Click here!

Tamiya 41085 Engine Parts & Accessories FR-32FX Alu. Heat Sink Head

Tamiya (#41085) - FS-32FX Aluminum Heat Sink Head - Engine Parts

How to get Tamiya 41085 Engine Parts & Accessories FR-32FX Alu. Heat Sink Head? Click here!

Tamiya 49171 Special Edition Spare Parts 7.2V.Racing Pack 1700MP

Tamiya 7.2V Racing Pack 1700MP Battery

How to get Tamiya 49171 Special Edition Spare Parts 7.2V.Racing Pack 1700MP? Click here!

Tamiya 49487 Special Edition Spare Parts GB-03 Titanium Screw Set

This set of 86 titanium screws enables fans to replace the standard screws on the GB-03 chassis with lightweight ultra-durable titanium screws for enhanced parts attachment precision.
*Compatible Chassis: GB-03

How to get Tamiya 49487 Special Edition Spare Parts GB-03 Titanium Screw Set? Click here!

Tamiya 41073 Engine Parts & Accessories HE Heat Sink FS12S Size Engine

Heat sink head finished in snazzy blue anodized aluminum. Original design features more than 3 times the number of fins as the normal heat sink, without increasing the overall height. More than 1.5 times the surface area improves heat dissipation effect. Stylish-looking heat sink can fit in low roofed cars such as the Ferrari F430 without needing to make a hole in the body. *Compatible Engines: FS-12SS, FS-12SW, FS-12SWG
Set includes:
- Heat sink head x 1
- Gasket x 1
- 2.5x12mm Cap screw x 4
- 2mm hexagonal wrench x 1

How to get Tamiya 41073 Engine Parts & Accessories HE Heat Sink FS12S Size Engine? Click here!

Tamiya 49492 Special Edition Spare Parts TRF416 Center One-Way Set

RC TRF416 Center One-Way Set

How to get Tamiya 49492 Special Edition Spare Parts TRF416 Center One-Way Set? Click here!

Tamiya 40550 TamTech-Gear Option Parts GT-01 Titanium Screw Set

This set allows you to replace all the standard 2.6mm diameter screws on the GT-01 chassis with lightweight titanium hex head screws for enhanced part attachment precision. Set includes:

Hex Head Screws
-2.6x5mm (x2)
-2.6x8mm (x17)
-2.6x12mm (x12)
-2.6x18mm (x5)

Hex Head Countersunk Screws
-2.6x6mm (x2)
-2.6x7mm (x2)
-2.6x8mm (x4)
-2.6x12mm (x1)
-2.6x14mm (x4)

*Compatible Chassis: GT-01

How to get Tamiya 40550 TamTech-Gear Option Parts GT-01 Titanium Screw Set? Click here!

Tamiya 49415 Bodies Mobil 1 SC LW Body

Tamiya presents this Mobil 1 SC430 spare body set for ITEM# 58675 Mobil 1 SC430 (TA-05). The clear body, which is made from a durable yet lightweight polycarbonate material and comes with a black-colored rear wing and full marking sticker sheets to depict the Mobil 1 SC430 racecar.
* Compatible chassis: TA05, TT-01, TGS, TNS, TB-02, TB Evolution V, and TRF415 (Excludes short wheelbase versions of these chassis)

How to get Tamiya 49415 Bodies Mobil 1 SC LW Body? Click here!

Tamiya 49493 Special Edition Spare Parts TRF416 Front Direct Coupling

RC TRF416 Fnt Direct Coupling

How to get Tamiya 49493 Special Edition Spare Parts TRF416 Front Direct Coupling? Click here!

Tamiya 40029 Bodies TamTech 1/14 McLaren MP4/6 Body

Tamiya 1/14 McLaren MP4/6 Hody Body

How to get Tamiya 40029 Bodies TamTech 1/14 McLaren MP4/6 Body? Click here!

Tamiya 40027 Bodies TamTech 1/14 Lotus 102B Body

Tamiya 1/14 Lotus 102B Body

How to get Tamiya 40027 Bodies TamTech 1/14 Lotus 102B Body ? Click here!

Tamiya 41083 Engine Parts & Accessories TRF FS-12FD Aluminum Heat Sink

This is a new aluminum heat sink head for the 2.1cc FS-12FD engine, found on ITEM 43529 Mad Spirit and ITEM 43531 Vodafone AMG-Mercedes C-Class DTM 2006. Not only is it much lighter than the standard heat sink head, its blue-colored finish also features distinctive Tamiya logos.

How to get Tamiya 41083 Engine Parts & Accessories TRF FS-12FD Aluminum Heat Sink? Click here!

Tamiya 49357 Special Edition Spare Parts TB-Evo4 Separate Motor Mount

Detachable two-part design makes for easy maintenance. Motor mount itself is shaped like heat sink to heighten cooling effect and prolong engine performance. Compatible Chassis: TB Evolution IV (Including MS) Set includes:

Blue anodized aluminum motor mount x 1
Input shaft returner x 1
3x13mm octagonal button head screws (blue) x 2

How to get Tamiya 49357 Special Edition Spare Parts TB-Evo4 Separate Motor Mount? Click here!

Tamiya 42121 TRF 3x45mm Blue Titan Turnbuckle*2

Titanium turnbuckles provide strong and lightweight performance on all on-road and off-road adjustable linkages.
-item 42122 Titanium blue turnbuckle wrench available seperately for easy tuning at the track.

How to get Tamiya 42121 TRF 3x45mm Blue Titan Turnbuckle*2? Click here!

Tamiya 42120 TRF 3x42mm Blue Titan Turnbuckle*2

Tamiya 42119 TRF 3x38mm Blue Titan Turnbuckle*2

Tamiya 42117 TRF 3x23mm Blue Titan Turnbuckle*2

Wednesday, February 10, 2010

Tamiya 42117 TRF 3x23mm Blue Titan Turnbuckle*2 (Updated at 2010/02/10 20:30)